1) Light

Unique electric generator,just a  little air can generate sufficient power

Self-illumination without connecting circuit to provide shadow free illumination

Integration of generator in the coupling enables the use of these airotors with light on the turbine hose without any power supply.

2) Water Spray

3 jets water spray for effective cooling of bur and treating contact surface

3) Bearing

Ceramic ball bearing in the handpiece with light ensues vibration- free and quiet operation and also provide long service life

4) Ergonomic Design

High-grade material with a stylish design

Push button cartridge to change bur, easy and convenient

Bordon 2-Hole connection for better compatability

5) Rust Free

Corrosion Resistant – Passivated

6) Disinfection

Autoclavable at 135℃ to avoid cross-infection

WALDENT LED AIROTOR

The integration of a generator in the coupling enables the use of these airotors with light on the turbine hose without any power supply.

Ceramic ball bearing in the handpiece with light ensues vibration-free and quiet operation and also provides long service life.

INDICATION –

• Used for cavity preparation, removal of tooth structure and margin creation.

ADVANTAGE –

• Unique electric generator, just a  little air can generate sufficient power
• Self-illumination without connecting the circuit to provide shadow-free illumination
• Push-button cartridge to change bur, easy and convenient.
• Autoclavable at 135℃ to avoid cross-infection.
• 3 jets water spray for effective cooling of bur and treating contact surface
• High-grade material with a stylish design
• Bordon 2-Hole connection for better compatibility.

TECHNICAL SPECIFICATIONS:

MAINTENANCE OF THE HIGH-SPEED HANDPIECES

• During the period of warranty, the dentist has to follow the manufacturer’s instructions and lubricate the handpiece with the lubricants supplied by the manufacturer.
• During autoclaving or sterilization procedures one must also follow the manufacturer’s instructions as far as the temperature to which the handpiece can be subjected to.
• Maintain the Air-Pressure of the compressor, it should not be more than 0.2 Mpa

STERILIZATION:

• Brush off excess dirt & wipe clean with an alcohol-soaked cloth
• Insert the handpiece in a sterilization pouch & seal it
• Autoclave for 20min. at 121°C or 15min. at 135°C

• 1 x Waldent LED Airotor Handpiece
• 1 x Key
• Instruction Manual

6 months against the manufacturing defect